I'm using the 330e more or less successfully on Ubuntu Linux, without any problems other than it hangs if I try to receive progress-scan PAL signals (which are not standard). Analogue TV, Composite and S-Video works great.
I followed instructions on the internet how to compile the drivers, but I can't remember which instructions... :) // Anders On 9/18/07, Rémi Delmas <[EMAIL PROTECTED]> wrote: > Hi there, > > Excuse my ignorance, but I have had the same issue. When I bought this > hardware, I did not realize that the 330e model was not yet supported > on linux. I tried to used the analog part of the card, but had no > success. Finally, I decided just to wait for dvb-t support to be > available. > This is a good time to join my voice to the chorus, though. I think > analog tv is supposed to work right now. I cannot be sure, though. > > Any idea when support for dvb on 330e will be available? > > Thanks so much, > -- > Remi > > > 2007/9/18, Craig Setera <[EMAIL PROTECTED]>: > > Hello, > > > > I've followed the instructions for installing these drivers and even > > believe it was working at one point. I've been playing around with > > things and can't remember what did and did not work. I can see the > > drivers loaded when inserting the device, but tvtime and mplayer don't > > work and I'm a bit confused about what I might have missed. I apologize > > if I should have put this on the wiki instead of via email. Any help > > appreciated. I'm attaching everything I believe is requested. I > > thought this was all working and yet I see a complaint about something > > missing in he logs. > > > > Also, I have no need in the DVB modules at this time... Can they be > > causing problems and if so, how do I stop them from loading? At the > > moment, I'm just trying to stream my satellite receiver's output on US > > NTSC broadcast channel 60. > > > > Thanks so much for any help, > > Craig > > > > $ cat /proc/version > > Linux version 2.6.20-16-server ([EMAIL PROTECTED]) (gcc version 4.1.2 > > (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 01:01:45 UTC 2007 > > > > $ gcc -v > > Using built-in specs. > > Target: i486-linux-gnu > > Configured with: ../src/configure -v > > --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr > > --enable-shared --with-system-zlib --libexecdir=/usr/lib > > --without-included-gettext --enable-threads=posix --enable-nls > > --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu > > --enable-libstdcxx-debug --enable-mpfr --enable-checking=release > > i486-linux-gnu > > Thread model: posix > > gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4) > > > > $ lsusb > > Bus 002 Device 009: ID 2304:0227 Pinnacle Systems, Inc. [hex] > > Bus 002 Device 006: ID 04b8:0821 Seiko Epson Corp. > > Bus 002 Device 005: ID 045e:006a Microsoft Corp. > > Bus 002 Device 004: ID 050d:0244 Belkin Components > > Bus 002 Device 001: ID 0000:0000 > > Bus 001 Device 002: ID 051d:0002 American Power Conversion Back-UPS Pro > > 500/1000/1500 > > Bus 001 Device 001: ID 0000:0000 > > > > /var/log/messages > > Sep 17 15:44:28 localhost kernel: [91829.500000] usb 2-8: new high speed > > USB device using ehci_hcd and address 8 > > Sep 17 15:44:29 localhost kernel: [91829.810000] usb 2-8: configuration > > #1 chosen from 1 choice > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: device is > > attached to a USB 2.0 bus > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: you're using > > the experimental/unstable tree from mcentral.de > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: there's also a > > stable tree available but which is limited to > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: linux <=2.6.19.2 > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: it's fine to > > use this driver but keep in mind that it will move > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: to > > http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: proved to be > > stable > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > > settings: 8 > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > > setting 0, max size= 0 > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > > setting 1, max size= 0 > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > > setting 2, max size= 1448 > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > > setting 3, max size= 2048 > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > > setting 4, max size= 2304 > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > > setting 5, max size= 2580 > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > > setting 6, max size= 2892 > > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > > setting 7, max size= 3072 > > Sep 17 15:44:29 localhost kernel: [91830.620000] input: em2880/em2870 > > remote control as /class/input/input9 > > Sep 17 15:44:29 localhost kernel: [91830.620000] em28xx-input.c: remote > > control handler attached > > Sep 17 15:44:29 localhost kernel: [91830.700000] attach_inform: eeprom > > detected. > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > a0: 65 00 00 00 1c 03 30 00 37 00 30 00 35 00 30 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > b0: 31 00 39 00 35 00 36 00 36 00 36 00 36 00 00 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Sep 17 15:44:30 localhost kernel: [91831.030000] EEPROM ID= 0x9567eb1a > > Sep 17 15:44:30 localhost kernel: [91831.030000] Vendor/Product ID= > > 2304:0227 > > Sep 17 15:44:30 localhost kernel: [91831.030000] AC97 audio (5 sample > > rates) > > Sep 17 15:44:30 localhost kernel: [91831.030000] 500mA max power > > Sep 17 15:44:30 localhost kernel: [91831.030000] Table at 0x27, > > strings=0x168e, 0x1ca4, 0x246a > > Sep 17 15:44:30 localhost kernel: [91831.150000] tuner 2-0061: chip > > found @ 0xc2 (em28xx #0) > > Sep 17 15:44:30 localhost kernel: [91831.150000] attach inform > > (default): detected I2C address c2 > > Sep 17 15:44:30 localhost kernel: [91831.150000] > > /home/setera/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner > > callback > > Sep 17 15:44:30 localhost kernel: [91831.150000] tuner 0x61: > > Configuration acknowledged > > Sep 17 15:44:30 localhost kernel: [91831.150000] > > /home/setera/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner > > callback > > Sep 17 15:44:30 localhost kernel: [91831.150000] > > /home/setera/src/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! > > Sep 17 15:44:30 localhost kernel: [91831.150000] > > /home/setera/src/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner > > successfully loaded > > Sep 17 15:44:30 localhost kernel: [91831.440000] attach_inform: tvp5150 > > detected. > > Sep 17 15:44:31 localhost kernel: [91831.900000] em28xx #0: reading i2c > > device failed (error=-110) > > Sep 17 15:44:31 localhost kernel: [91831.900000] tvp5150 2-005c: *** > > unknown tvp5150 chip detected. > > Sep 17 15:44:31 localhost kernel: [91831.900000] tvp5150 2-005c: *** Rom > > ver is 4.234 > > Sep 17 15:44:34 localhost kernel: [91835.540000] Loading base firmware: > > xc3028_init0.i2c.fw > > Sep 17 15:44:54 localhost kernel: [91854.990000] Loading default > > analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw > > Sep 17 15:44:54 localhost kernel: [91855.550000] xc3028-tuner.c: > > firmware 2.7 > > Sep 17 15:44:54 localhost kernel: [91855.550000] ANALOG TV REQUEST > > Sep 17 15:44:55 localhost kernel: [91855.930000] em28xx #0: V4L2 device > > registered as /dev/video0 > > Sep 17 15:44:55 localhost kernel: [91855.930000] em28xx-audio.c: probing > > for em28x1 non standard usbaudio > > Sep 17 15:44:55 localhost kernel: [91855.930000] em28xx-audio.c: > > Copyright (C) 2006 Markus Rechberger > > Sep 17 15:44:55 localhost kernel: [91855.930000] em2880-dvb.c: DVB Init > > Sep 17 15:44:55 localhost kernel: [91855.930000] Loading base firmware: > > xc3028_8MHz_init0.i2c.fw > > Sep 17 15:45:15 localhost kernel: [91875.850000] Loading default dtv > > settings: xc3028_DTV8_2633.i2c.fw > > Sep 17 15:45:15 localhost kernel: [91876.400000] xc3028-tuner.c: > > firmware 2.7 > > Sep 17 15:45:15 localhost kernel: [91876.400000] Sending extra call for > > Digital TV! > > Sep 17 15:45:15 localhost kernel: [91876.570000] > > /home/setera/src/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! > > Sep 17 15:45:15 localhost kernel: [91876.570000] DVB: registering new > > adapter (em2880 DVB-T) > > Sep 17 15:45:15 localhost kernel: [91876.570000] DVB: registering > > frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... > > Sep 17 15:45:15 localhost kernel: [91876.570000] em28xx #0: Found > > Pinnacle PCTV HD Pro > > Sep 17 15:46:00 localhost kernel: [91921.380000] em28xx-video.c: > > Switching device from DVB-T to analogue mode > > Sep 17 15:46:00 localhost kernel: [91921.380000] Loading base firmware: > > xc3028_init0.i2c.fw > > Sep 17 15:46:07 localhost kernel: [91927.890000] > > FIXME:em28xx_i2c_send_bytes(c2): write failed: > > Sep 17 15:46:07 localhost kernel: [91927.890000] > > =============================== > > Sep 17 15:46:07 localhost kernel: [91927.890000] 04 0d e0 00 > > Sep 17 15:46:07 localhost kernel: [91927.890000] > > ================================ > > Sep 17 15:46:21 localhost kernel: [91941.820000] Loading default > > analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw > > Sep 17 15:46:21 localhost kernel: [91942.450000] xc3028-tuner.c: > > firmware 2.7 > > Sep 17 15:46:22 localhost kernel: [91943.160000] em28xx #0: reading i2c > > device failed (error=-110) > > Sep 17 15:46:22 localhost kernel: [91943.160000] tvp5150 2-005c: *** > > unknown tvp5150 chip detected. > > Sep 17 15:46:22 localhost kernel: [91943.160000] tvp5150 2-005c: *** Rom > > ver is 4.234 > > Sep 17 15:46:25 localhost kernel: [91946.660000] ANALOG TV REQUEST > > Sep 17 15:46:26 localhost kernel: [91947.230000] ANALOG TV REQUEST > > Sep 17 15:46:26 localhost kernel: [91947.230000] > > xc3028_tuner_set_params, Loading specific configuration for requested > > mode xc3028_MN_NTSCPAL_A2.i2c.fw > > > > Running tvtime 1.0.2. > > Reading configuration from /etc/tvtime/tvtime.xml > > Reading configuration from /home/setera/.tvtime/tvtime.xml > > videoinput: Can't get tuner info: Input/output error > > videoinput: Can't set tuner audio mode: Input/output error > > > > Your capture card driver: em28xx [Pinnacle PCTV HD Pro/2-8/1] > > does not support studio-quality colour images required by tvtime. > > This is a hardware limitation of some cards including many > > low-quality webcams. Please select a different video device to use > > with the command line option --device. > > > > Message from the card was: Input/output error > > > > Thank you for using tvtime. > > > > MPlayer 2:1.0~rc1-0ubuntu9.1 (C) 2000-2006 MPlayer Team > > CPU: AMD Athlon(tm) 64 Processor 3000+ (Family: 15, Model: 47, Stepping: 2) > > CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 > > Compiled with runtime CPU detection. > > Can't open joystick device /dev/input/js0: No such file or directory > > Can't init input joystick > > mplayer: could not connect to socket > > mplayer: No such file or directory > > Failed to open LIRC support. You will not be able to use your remote > > control. > > > > Playing tv://. > > TV file format detected. > > Selected driver: v4l2 > > name: Video 4 Linux 2 input > > author: Martin Olschewski <[EMAIL PROTECTED]> > > comment: first try, more to come ;-) > > Selected device: Pinnacle PCTV HD Pro > > Tuner cap: > > Tuner rxs: > > Capabilites: video capture tuner audio read/write streaming > > supported norms: > > inputs:v4l2: ioctl get input failed: Input/output error > > > > Current input: 0 > > Current format: YUYV > > v4l2: ioctl get format failed: Input/output error > > > > > > > > _______________________________________________ > > Em28xx mailing list > > [email protected] > > http://mcentral.de/mailman/listinfo/em28xx > > > > _______________________________________________ > Em28xx mailing list > [email protected] > http://mcentral.de/mailman/listinfo/em28xx > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
