for the experimentally inclined, I've built the artek branch with the simulated spindle encoder thrown in
see notes here: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ArtekBranch changes from here: http://git.mah.priv.at/gitweb/emc2-dev.git/shortlog/refs/heads/arais-mah -Michael Am 01.04.2012 um 08:12 schrieb Michael Haberler: > > Am 01.04.2012 um 06:54 schrieb Jon Elson: > >> Yishin Li wrote: > ... > >> All you need is an encoder with index on the spindle. > > which might even be a simulated one to start with; Jeff came up with one and > I merged it, also all the sim configs use this simulated encoder: > > http://git.mah.priv.at/gitweb/emc2-dev.git/commit/01448f442e1b4e45e5659dd0e4b9a38946b411a1 > > - Michael > > > > ------------------------------------------------------------------------------ > This SF email is sponsosred by: > Try Windows Azure free for 90 days Click Here > http://p.sf.net/sfu/sfd2d-msazure > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers