Does 3D printer g-code use relative coordinates? On Fri, Aug 16, 2013, at 06:36 PM, andy pugh wrote: > On 16 August 2013 23:25, John Kasunich <[email protected]> wrote: > > Can that simply be multiplied by a scale factor and > > used to drive the extruder? > > I don't think it is as wrong as it looks. > > G1 Xq10 Y10 A100 means "move 10mm each way and deposit 100mg of goop > in a motion-synchronised way as you go" > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite! > It's a free troubleshooting tool designed for production. > Get down to code-level detail for bottlenecks, with <2% overhead. > Download for free and get started troubleshooting in minutes. > http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers
-- John Kasunich [email protected] ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
