if you go ahead with this, let us know i will test it out, as we have 3 lathers here in production that are Slantbed lathes, currently run a axis hack around but do not get any tool previews due to it. so woul dbe nice to have a real fix
as for G02 and G03, when changing from machine of front post , to back or slant just reprogram the G02 to a G03 and visa versa problem solved, all the other stuff stays the same and yes the tool rotations have been wonky for ages going from any other control to linuxcnc is always fun if you want tool comp rob On 21/10/2013 09:03, Chris Morley wrote: > Saw some discussion on this. > This is a patch for an INI option to invert the X axis display. > > The code called in glnav.py is already included (gremlin uses it) > > Is this something we would like included in linuxcnc? > > Chris M > ------------------------------------------------------------------------------ November Webinars for C, C++, Fortran Developers Accelerate application performance with scalable programming models. Explore techniques for threading, error checking, porting, and tuning. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60136231&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
