are you saying have a g41.1 on On 10/2/2014 10:07 AM, Dave Cole wrote: > On 10/2/2014 10:46 AM, andy pugh wrote: >> On 2 October 2014 15:40, Dave Cole <[email protected]> wrote: >>> They would like to be able to adjust the jet size (think tool diameter) >>> on the fly >> This is probably most easily done with G42.1 and G41.1, though the >> G-code would have to actually stop and look for new values from an >> input source. >> >> Any change of tool diameter would require a recalculation of the >> motion queue, so I don't think that there is any way to do it >> completely live. >> As an initial step job-by-job, however, it would be relatively easy. > So perhaps if I had the tool/jet diameter in a hal float pin, I could > use that along with the analog input function in Gcode to grab the hal > value and then assign it via an invocation of G42.1 or G41.1 ? > > Does that sound possible/reasonable? > > So in this respect the tool table becomes a non issue? Does this sound > correct? > > Thanks, > > Dave > > --- > This email is free from viruses and malware because avast! Antivirus > protection is active. > http://www.avast.com > > > ------------------------------------------------------------------------------ > Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer > Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports > Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper > Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer > http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > >
------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
