We are on the right track, I just need to get everything ironed out on my end in regards to using gmoccapy.
We do not though, expect to see the subroutine in the loaded gcode window. Thanks Rick Lair Superior Roll & Turning LLC. PH: 734-279-1831 www.superiorroll.com -----Original Message----- From: andy pugh [mailto:[email protected]] Sent: Wednesday, August 06, 2014 8:04 AM To: EMC developers Subject: Re: [Emc-developers] Tool Table and Wear offset Table On 6 August 2014 12:40, Rick Lair <[email protected]> wrote: > The guys tried running a program last night, and as soon as it gets to the > tool call in the program, the gcode for the program disappears and the > subroutine pops up in the window, and the gremlin backplot jumps from the > picture of the part and goes back to the 0,0 point of the display, > > We are using gmoccapy if that makes a difference? I have heard other reports that Gmoccapy does that. I don't think that Axis does, which is why I didn't spot it. I don't know if you would ever expect to see the G-code of a subroutine call or remap, so I am not sure where the fix belongs. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ---------------------------------------------------------------------------- -- Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
