> On 5. Dec 2017, at 10:33, Chris Morley <chrisinnana...@hotmail.com> wrote: > > I actually wonder why the controller must have modes at all. > > The only thing really important is if it is busy it must finish.
removing modes altogether would solve a lot of problems. especially jogging while paused, which is a much requested feature, and comes up very often. there is a jog while paused branch, which already does most of the stuff, like going back to the old position when you continue. > > ie if it's busy running an MDI command it can't jog > > If it's running a program it can't MDI > > etc > > Traditionally NC machines separated these modes with a switch. > > I don't see why we need to do that any more. > > > If the controller is idle it should be able to do anything. > > This would leave it to the UI/user to decide whats allowed when. > > > UIs have been working around this problem for a very long time. > > Ie touchoff is an MDI command which is quite obviously a manual > > mode command. > > > Chris M > > ________________________________ > From: Kurt Jacobson <kurtcjacob...@gmail.com> > Sent: December 4, 2017 7:27 PM > To: EMC developers > Subject: Re: [Emc-developers] Mode switching bug > > Any UI that wants to work well with wheel jogging has to find some way of > setting the task_mode > back to manual after each MDI command, and as we have seen that is not > trivial to do without > breaking external programs that issue MDI commands. In fact, I do not think > it is an overstatement > to say that so far *nobody* has managed to make both wheel jogging and > external MDI commands > work satisfactorily at the same time. > > Since all UIs suffer from this problem, it seem like instead of each UI > using some kind of work > around, this problem might should be solved at a lower level. > > I have no idea what MDI mode actually does internally, but from a practical > user perspective, I can't think > of any time were there is a need for LCNC to remain in MDI mode after > issuing an MDI. > > As far as I can tell most UIs that work well with wheel jogging employ > something like the following pseudo code: > > def issue_mdi(cmd): > set_mode(MDI) > issue_mdi(cmd) > set_mode(MANUAL) > > while(True): > if not mode_manual and is_idle: > set_mode(MANUAL) > > So basically the UI ensures that LCNC is not in MDI mode unless it it > actively issuing an MDI command, which > essentially is the same thing as not having an MDI mode at all (from the > users perspective). So what if instead > of making each UI have to handle switching back to manual mode this is done > elsewhere. For example `command.mdi()` > could switch LCNC to mdi mode, issues the command, and then switched back > to manual. > > It seems like something like this would make life simpler for the UIs ... > > Cheers, > Kurt > > > On Mon, Dec 4, 2017 at 11:43 AM, Kurt Jacobson <kurtcjacob...@gmail.com> > wrote: > >> On Mon, Dec 4, 2017 at 10:54 AM, Rene Hopf <reneh...@mac.com> wrote: >> >>> >>>> On 4. Dec 2017, at 16:14, Les Newell <les.new...@fastmail.co.uk> wrote: >>>> >>>> This is master as of a couple of months ago. I'd rather not install the >>> patch because I want it to switch back to manual after MDI. >>> >>> the patch should still allow you to do that. thats why I asked you to >>> test. >>> >> >> I am afraid not. Dewey's branch does not switch back to manual after an >> MDI, at least in my tests. >> >> > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers