I am using the latest Glade version (3.40.0), probably THE latest
version unfortunately.
But also versions like 3.38.0 should be fine.
You have to make sure that you have the catalogs, that is easiest done
when editing it in a run-in-place environment
(https://linuxcnc.org/docs/html/code/building-linuxcnc.html#_building_for_run_in_place)
Am 30.12.23 um 17:22 schrieb melhima:
Hi Hans
Thanks for your answer
Ok got that no problem to restart the job
But could you tell me wich one version of glade can edit the gmoccapy
file and match with the components
I would like to make sure this time will.be the right one ;)
Thanks a lot
Cordialement,
Moustapha Elhima
*ELMO - machines outils
*+33 6 09 99 21 97
Penser à préserver l'environnement avant d'imprimer ce message. Merci
-------- Message d'origine --------
De : Hans Unzner <hansunz...@gmail.com>
Date : 30/12/2023 16:57 (GMT+01:00)
À : emc-developers@lists.sourceforge.net
Objet : Re: [Emc-developers] Linuxcnc 2.10pre with glade
I'm afraid but I think you have to do your modifications once more for
LinuxCNC 2.9/2.10. There have been so many changes during the upgrade
from Python2 to Python3 and Gtk2 to Gtk3, which make it almost
impossible to merge from 2.8, especially the glade file. Also a huge
number of deprecated widgets have been replaced in Gmoccapy for
LinuxCNCN 2.9.
So I would recommend to just do it again for the current version. Sorry.
Hans
Am 30.12.23 um 15:08 schrieb ELHIMA Moustapha via Emc-developers:
> Hi guy's
>
> Houston I have a problem... I project to use the mesa 5i25T instead
off the 5i25 ( was good for me)
> For the I need at list the linuxcnc2.10pre version
>
> I had customized the gmoccapy interface (gmoccapy.glade) to get some
other functionality and work also on the bin file of it
> After few hours of work... I get the suprise to had made all of this
stuff on the 2.8 version of linuxcnc.....
>
> I said " ok lets spend again a part of your life time again...". So
I decided to merge to the buster version and install linuxcnc from the
biuldbot.
> Linuxcnc2.10pre and the mesa 5i25T working fine.
> So 2nd step was to make the same modification on the gmoccapy
interface and I get a terrible headache.....
> Python need to be version 3 instead off 2 for linuxcnc2.8 but ok no
problem for that ( or maybe there is a script to merge python 2 to 3?)
> For Glade I had installed v3.40 and no way to get the hal library
and gladevcp.
>
> Is it possible to get the right way to update gmoccapy on linuxcnc
2.10pre???
>
> Thanks for your help
>
> Cordialement,
>
> Moustapha Elhima
> ELMO - machines outils
> +33 6 09 99 21 97
>
> P Penser à préserver l'environnement avant d'imprimer ce message. Merci
>
> _______________________________________________
> Emc-developers mailing list
> Emc-developers@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-developers
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
