You really are on a hiding to nothing trying to work with or upgrade a buster distribution because Python 2.7 has been obsoleted. A much quicker pathway would be to Install the latest 2.9.2 Iso from https://linuxcnc.org/iso/LinuxCNC_2.9.2-amd64.hybrid.iso
If you really want to use 2.10 from the buildbot 2 at http://buildbot2.highlab.com/ edit /etc/apt/sources.list.d/linuxcnc.list to use the lines shown on the buildbot page to be something like deb http://buildbot2.highlab.com/debian/ bookworm master-uspace Rod Webster *1300 896 832* +61 435 765 611 Vehicle Modifications Network www.vehiclemods.net.au On Sun, 31 Dec 2023 at 07:37, Hans Unzner <hansunz...@gmail.com> wrote: > I am using the latest Glade version (3.40.0), probably THE latest > version unfortunately. > But also versions like 3.38.0 should be fine. > You have to make sure that you have the catalogs, that is easiest done > when editing it in a run-in-place environment > ( > https://linuxcnc.org/docs/html/code/building-linuxcnc.html#_building_for_run_in_place > ) > > Am 30.12.23 um 17:22 schrieb melhima: > > Hi Hans > > > > Thanks for your answer > > Ok got that no problem to restart the job > > But could you tell me wich one version of glade can edit the gmoccapy > > file and match with the components > > I would like to make sure this time will.be the right one ;) > > Thanks a lot > > > > Cordialement, > > > > Moustapha Elhima > > *ELMO - machines outils > > *+33 6 09 99 21 97 > > > > Penser à préserver l'environnement avant d'imprimer ce message. Merci > > > > > > -------- Message d'origine -------- > > De : Hans Unzner <hansunz...@gmail.com> > > Date : 30/12/2023 16:57 (GMT+01:00) > > À : emc-developers@lists.sourceforge.net > > Objet : Re: [Emc-developers] Linuxcnc 2.10pre with glade > > > > I'm afraid but I think you have to do your modifications once more for > > LinuxCNC 2.9/2.10. There have been so many changes during the upgrade > > from Python2 to Python3 and Gtk2 to Gtk3, which make it almost > > impossible to merge from 2.8, especially the glade file. Also a huge > > number of deprecated widgets have been replaced in Gmoccapy for > > LinuxCNCN 2.9. > > So I would recommend to just do it again for the current version. Sorry. > > > > Hans > > > > Am 30.12.23 um 15:08 schrieb ELHIMA Moustapha via Emc-developers: > > > Hi guy's > > > > > > Houston I have a problem... I project to use the mesa 5i25T instead > > off the 5i25 ( was good for me) > > > For the I need at list the linuxcnc2.10pre version > > > > > > I had customized the gmoccapy interface (gmoccapy.glade) to get some > > other functionality and work also on the bin file of it > > > After few hours of work... I get the suprise to had made all of this > > stuff on the 2.8 version of linuxcnc..... > > > > > > I said " ok lets spend again a part of your life time again...". So > > I decided to merge to the buster version and install linuxcnc from the > > biuldbot. > > > Linuxcnc2.10pre and the mesa 5i25T working fine. > > > So 2nd step was to make the same modification on the gmoccapy > > interface and I get a terrible headache..... > > > Python need to be version 3 instead off 2 for linuxcnc2.8 but ok no > > problem for that ( or maybe there is a script to merge python 2 to 3?) > > > For Glade I had installed v3.40 and no way to get the hal library > > and gladevcp. > > > > > > Is it possible to get the right way to update gmoccapy on linuxcnc > > 2.10pre??? > > > > > > Thanks for your help > > > > > > Cordialement, > > > > > > Moustapha Elhima > > > ELMO - machines outils > > > +33 6 09 99 21 97 > > > > > > P Penser à préserver l'environnement avant d'imprimer ce message. Merci > > > > > > _______________________________________________ > > > Emc-developers mailing list > > > Emc-developers@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > > > > > > _______________________________________________ > > Emc-developers mailing list > > Emc-developers@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
