Hi It work fine I can use my updated interface with linuxcnc 2.10pre ! Thanks for your help! I had made some modification on dxf2gcode as well to change all arc into segment with a settable value Estimation time as well etc... Once I will finish the custom entry and exit on a shape I will share the source. My machine is a 2 axis rotating table with Y axis and a diamond wire cable as tool My target was to transform the standard kinematic (XY) to (AY) .
And Happy new year! Cordialement, Moustapha Elhima P Penser à préserver l'environnement avant d'imprimer ce message. Merci ________________________________ De : Steffen Möller via Emc-developers <emc-developers@lists.sourceforge.net> Envoyé : dimanche 31 décembre 2023 08h42 À : emc-developers@lists.sourceforge.net <emc-developers@lists.sourceforge.net> Cc : Steffen Möller <steffen_moel...@gmx.de> Objet : Re: [Emc-developers] Linuxcnc 2.10pre with glade Hello, Once you have integrated your changes with the latest version I expect that you can run this all through Glade again. If not then something was broken in that process, I presume. But I am no expert on what Gmoccapy is doing or on how to modify it - my answer was only on how to use a recursive diff and transition that to the master branch. Good luck! Steffen > Hi SteffenOk I see, so no way to edit the file with glade?Gmoccapy was > created with witch version?Thanks again for your helpCordialement,Moustapha > ElhimaPenser à préserver l'environnement avant d'imprimer ce message. Merci > -------- Message d'origine --------De : Steffen Möller via Emc-developers > <emc-developers@lists.sourceforge.net> Date : 30/12/2023 22:10 (GMT+01:00) > À : emc-developers@lists.sourceforge.net Cc : Steffen Möller > <steffen_moel...@gmx.de>, emc-developers@lists.sourceforge.net Objet : Re: > [Emc-developers] Linuxcnc 2.10pre with glade Well, there may be another > option if you still have (or can still retrieve) the tarball from which you > started.It is three steps:1. Rename your current source tree to avoid > overwriting it, call it "mywork"2. Unpack the original tarball of LinuxCNC of > version 2.8 that you edited.3. Create a diff of the two and redirect that > into a file: diff -r original mywork > whateverpathto/mywork.patch4. Clone > the current master branch of LinuxCNC5. patch it with what you saved in > mywork.patch: patch -p1 < whateverpathto/mywork.patchNot all hunks of that > patch will work, but many will be just fine.Good luck!Steffen> Gesendet: > Samstag, 30. Dezember 2023 um 16:55 Uhr> Von: "Hans Unzner" > <hansunz...@gmail.com>> An: emc-developers@lists.sourceforge.net> Betreff: > Re: [Emc-developers] Linuxcnc 2.10pre with glade>> I'm afraid but I think you > have to do your modifications once more for > LinuxCNC 2.9/2.10. There have > been so many changes during the upgrade > from Python2 to Python3 and Gtk2 to > Gtk3, which make it almost > impossible to merge from 2.8, especially the > glade file. Also a huge > number of deprecated widgets have been replaced in > Gmoccapy for > LinuxCNCN 2.9.> So I would recommend to just do it again for > the current version. Sorry.> > Hans> > Am 30.12.23 um 15:08 schrieb ELHIMA > Moustapha via Emc-developers:> > Hi guy's> >> > Houston I have a problem... I > project to use the mesa 5i25T instead off the 5i25 ( was good for me)> > For > the I need at list the linuxcnc2.10pre version> >> > I had customized the > gmoccapy interface (gmoccapy.glade) to get some other functionality and work > also on the bin file of it> > After few hours of work... I get the suprise to > had made all of this stuff on the 2.8 version of linuxcnc.....> >> > I said " > ok lets spend again a part of your life time again...". So I decided to merge > to the buster version and install linuxcnc from the biuldbot.> > > Linuxcnc2.10pre and the mesa 5i25T working fine.> > So 2nd step was to make > the same modification on the gmoccapy interface and I get a terrible > headache.....> > Python need to be version 3 instead off 2 for linuxcnc2.8 > but ok no problem for that ( or maybe there is a script to merge python 2 to > 3?)> > For Glade I had installed v3.40 and no way to get the hal library and > gladevcp.> >> > Is it possible to get the right way to update gmoccapy on > linuxcnc 2.10pre???> >> > Thanks for your help> >> > Cordialement,> >> > > Moustapha Elhima> > ELMO - machines outils> > +33 6 09 99 21 97> >> > P > Penser à préserver l'environnement avant d'imprimer ce message. Merci> >> > > _______________________________________________> > Emc-developers mailing > list> > Emc-developers@lists.sourceforge.net> > > https://lists.sourceforge.net/lists/listinfo/emc-developers> > > > > _______________________________________________> Emc-developers mailing list> > Emc-developers@lists.sourceforge.net> > https://lists.sourceforge.net/lists/listinfo/emc-developers>_______________________________________________Emc-developers > mailing > listEmc-developers@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers