I am aware of one manufacturer who inquired about this subject with an
authority in Europe and was told that the DOC must be "readily available"
for inspection. When asked whether posting on the internet would satisfy
that criteria, the answer was affirmative. You might like to inquire to
another official source and see if the same answer is given. This company
now posts all DOCs and certificates of compliance (safety) on their web
site.
M.Sitarski
Eastman Kodak Company
Rochester, NY
Bob:
Yes this is my understanding, The EC DofC just
identifies the signatory and the copy resides with the
EC agent.
______________________________ Reply Separator
_________________________________
Subject: Re: Signatory for US based Manufacturer
Author: Robert Tims <rt...@emx.ericsson.se> at Internet
List-Post: emc-pstc@listserv.ieee.org
Date: 12/15/98 1:33 PM
Hi all,
I have a question to clarify......
Is it to be understood that the EC DofC can be signed by the US
manufacturer,
and authorized copy of said document just has to reside with the rep in the
EC?
This could save me a lot of time and bs.....
Regards,
Bob Tims
Mike Hopkins wrote:
> I'll quote from the directive, Article 10, 1st paragraph:
>
> "1. In the case of apparatus for which the manufacturer has applied the
> standards referred to in Article 7 (1), the conformity of apparatus with
> this Directive shall be certified by an EC declaration of conformity
issued
> by the manufacturer or his authorized representative established within
the
> Community......"
>
> Seems clear to me that either the manufacturer, "... or his authorized
> representative established within the Community...." can sign the
> Declaration.
>
> Mike Hopkins
> mhopk...@keytek.com
>
> > -----Original Message-----
> > From: bill.jacowl...@chr.carsys.philips.com
> > [SMTP:bill.jacowl...@chr.carsys.philips.com]
> > Sent: Monday, December 14, 1998 4:07 PM
> > To: emc-p...@ieee.org
> > Subject: Signatory for US based Manufacturer
> >
> > Greetings to all:
> >
> > I am interested in finding out who usually acts as the
Signatory
> > for a EC Declaration of Conformance for a US based
manufacturer.
> >
> > Thanks in advance,
> >
> > Bill Jacowleff
> > VDO Control Systems
> > 150 Knotter Drive
> > Cheshire, CT 06410
> > Phone: 203 271-6394
> > FAX : 203 271-6200
> > Email: bill.jacowl...@chr.carsys.philips.com
---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to majord...@ieee.org
with the single line: "unsubscribe emc-pstc" (without the
quotes). For help, send mail to ed.pr...@cubic.com,
j...@gwmail.monarch.com, ri...@sdd.hp.com, or
roger.volgst...@compaq.com (the list administrators).
