Kamran, The method used by most of the better magnetics houses is to embed thermocouples into the transformer during construction of a sample. The resulting temperatures will be higher than external measurements.
Scott Lacey -----Original Message----- From: Kamran Mohajer [SMTP:kmoha...@cisco.com] Sent: Tuesday, August 24, 1999 5:50 PM To: emc-p...@ieee.org Subject: Temperature Measuring of Magnetic Components Hello EMC-PSTCers, I wonder if anyone knows of the method of measuring temperature limits on magnetic components. I happen to get involved in this and found that my results are different than the vendors result by as much as 10-15 degrees on measuring on a same magnetic component. Even applying the thermocouple to different location on a coil seems to give you different results. Is there a method that I should be following to measure temperature with thermocouples methods, not change of resistance, on magnetic parts such as transformers, coils, etc.? Thanks, **************************************************************************** ******* Kamran Mohajer DSL Compliance Lead Cisco Systems, Inc. Phone(408)-525-6121 Fax(408)527-0495 kmoha...@cisco.com **************************************************************************** ******* --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).