Group: Here is a typical example of what is wrong with those european standards. Question: If you bought a TV set, turned it on, and it started to smoke, wouldn't you consider that a "failure?" I dont know what they do in europe, but here in america we would return it and get our money back.
Lou At 12:06 AM 4/17/99 +0300, you wrote: >Dear Jeff, > >If a product smokes after an abnormal test it is not considered a >failure. If the smoke was from an electrolytic capacitor, some test >agencies might ask you to submit a declaration fom the capacitor >manufacturer that the elecrolyte is not toxic. > >In regards to SEMI, if a product smoked after an abnormal test, it >is also not considered a failure. > >Best Regards, > >> I'm full of questions this week. Here's today's. >> >> If a component abnormal test generates excessive and sustained smoke >> (several minutes), but does'nt breach reinforced or double insulation, nor >> emit flame from the enclosure, is it considered a failure? Intuitively, it >> seems like it would be, because of toxicity, but I have been unable to find >> anything in the safety standards to support this. I have checked EN 60950, >> EN 50178, UL 1012, and CSA C22.2 No. 107.1. >> >> By the way, this product could be used in clean room applications. I am >> familiar with Semi S2, but it is unclear as to the degree of smoke allowed. >> Section 19.1 says, "The use of combustible and smoke-generating materials in >> the construction of the process equipment should be limited." In this case, >> it was a PCB that smoked. >> >> Thanks. >> >> Jeff Jenkins >> Senior Regulatory Compliance Engineer >> Advanced Energy Industries, Inc. >> Fort Collins, CO USA 80525 >> >> Opinions are my own and not necessarily shared by Advanced Energy >> Industries, Inc. or its affiliates. >> >> --------- >> This message is coming from the emc-pstc discussion list. >> To cancel your subscription, send mail to majord...@ieee.org >> with the single line: "unsubscribe emc-pstc" (without the >> quotes). For help, send mail to ed.pr...@cubic.com, >> j...@gwmail.monarch.com, ri...@sdd.hp.com, or >> roger.volgst...@compaq.com (the list administrators). >> > > >PETER S. MERGUERIAN >MANAGING DIRECTOR >PRODUCT TESTING DIVISION >I.T.L. (PRODUCT TESTING) LTD. >HACHAROSHET 26, P.O.B. 211 >OR YEHUDA 60251, ISRAEL > >TEL: 972-3-5339022 >FAX: 972-3-5339019 >E-MAIL: pe...@itl.co.il >Visit our Website: http://www.itl.co.il > >--------- >This message is coming from the emc-pstc discussion list. >To cancel your subscription, send mail to majord...@ieee.org >with the single line: "unsubscribe emc-pstc" (without the >quotes). For help, send mail to ed.pr...@cubic.com, >j...@gwmail.monarch.com, ri...@sdd.hp.com, or >roger.volgst...@compaq.com (the list administrators). > --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, j...@gwmail.monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).