Dear members,

>From IEC61000-4-2 and several EN-product standards, they specify the time 
between successive discharges to be at least 1 second.

But what is the maximum time between each pulse ? I can not see that it is 
stated in any standards. I guess the test labs use 1 pulse pr second.

I feel that the pulse rate can have influences on the EUT performance, so 1 
second compared to 3-5 seconds might be the difference between PASS and FAIL.

Any suggestions ?

Best regards
Amund Westin
Oslo, Norway

-- 
Get your firstname@lastname email for FREE at http://Nameplanet.com/?su

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        pstc_ad...@garretson.org
     Dave Heald                davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://www.rcic.com/      click on "Virtual Conference Hall,"

Reply via email to