I saw that but it makes no sense - there are coax switches in EMI receivers
that take inputs from antennas making EMI measurements, looking at microvolt
inputs.

----------
>From: richwo...@tycoint.com
>To: emc-p...@majordomo.ieee.org
>Subject: RE: Coaxial Switches - use with spectrum analyzer and gear?
>Date: Thu, May 23, 2002, 3:36 PM
>

>
> That information is from an application document found on the Dow Key web
> site. I can't say that I fully understand it myself.
>
> Richard Woods
> Sensormatic Electronics
> Tyco International
>
>
>
> -----Original Message-----
> From: Ken Javor [mailto:ken.ja...@emccompliance.com]
> Sent: Thursday, May 23, 2002 3:59 PM
> To: richwo...@tycoint.com; emc-p...@majordomo.ieee.org
> Subject: Re: Coaxial Switches - use with spectrum analyzer and gear?
>
>
> I don't understand the snipped statement below.  Isn't the loss just a
> fraction of the power flowing through the switch?
>
> ----------
>>From: richwo...@tycoint.com
>>To: emc-p...@majordomo.ieee.org
>>Subject: RE: Coaxial Switches - use with spectrum analyzer and gear?
>>Date: Thu, May 23, 2002, 12:22 PM
>>
>
>> A minimum power of about -20dbm must be used to overcome the
>> losses in the switch.
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
>
> To cancel your subscription, send mail to:
>      majord...@ieee.org
> with the single line:
>      unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
>      Ron Pickard:              emc-p...@hypercom.com
>      Dave Heald:               davehe...@attbi.com
>
> For policy questions, send mail to:
>      Richard Nute:           ri...@ieee.org
>      Jim Bacher:             j.bac...@ieee.org
>
> All emc-pstc postings are archived and searchable on the web at:
>     http://ieeepstc.mindcruiser.com/
>     Click on "browse" and then "emc-pstc mailing list"
> 

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to