That information is from an application document found on the Dow Key web site. I can't say that I fully understand it myself.
Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: Ken Javor [mailto:ken.ja...@emccompliance.com] Sent: Thursday, May 23, 2002 3:59 PM To: richwo...@tycoint.com; emc-p...@majordomo.ieee.org Subject: Re: Coaxial Switches - use with spectrum analyzer and gear? I don't understand the snipped statement below. Isn't the loss just a fraction of the power flowing through the switch? ---------- >From: richwo...@tycoint.com >To: emc-p...@majordomo.ieee.org >Subject: RE: Coaxial Switches - use with spectrum analyzer and gear? >Date: Thu, May 23, 2002, 12:22 PM > > A minimum power of about -20dbm must be used to overcome the > losses in the switch. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
