In 20 years, I've never seen this before but that's not saying much. Why would a mfr get a UL recognition approval for a commercial ITE style single phase 155-230vac computer style product but for that same product get the TUV "GS" mark?
Mfr is a stateside company. Product to be used in restricted areas with trained personnel only. But, one that essentially anyone could buy. What's the advantage of getting such a mixed set of approvals? I would assume such a thing would normally get a Listing. Maybe turning the question around for our overseas friends - why would you get a GS mark for your product but only get UL recognition for an ITE computer product when it's normal to get a listing for such a product? And now I'm wondering if with such a device that there's some deviation within the testing as to cause the product to be GS accepted but not with a listing. Regards, Doug (scratching head...) ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
