On Fri, 22 Mar 2002 16:53:27 -0800, "Chris Wells" <cdwe...@stargate.net> wrote:
> Masking > As to all those who indicate masking off the metal what about oxidation? > I'm concerned about the appearance of masking off the painted areas. To avoid corrosion of the exposed steel surface, plating (Zn, Ni, Cr, etc.) can be used. You can mask off only the areas of metal plates where they will be covered by the other metal plates when the enclosure is assembled (i.e. area where the metal surface will contact with the other metal surface), hence it can be designed so that it will not make the appearance poor. Regards, Tom -------------------------------------------------- Tomonori Sato <vef00...@nifty.ne.jp> URL: http://member.nifty.ne.jp/tsato/ ---- xvkbd-2.2 (virtual keyboard for X) available ---- ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"