Secondary site of the transformer is a WHY with the star point connected to ground (neutral not used).
----- Original Message ----- From: "John Shinn" <john.sh...@sanmina-sci.com> To: "'Arno van Kesteren'" <avkes...@eso.org>; <emc-p...@ieee.org> Sent: Friday, March 22, 2002 5:16 PM Subject: RE: Phase loss > > Delta or WYE 3-phase circuit? > > John Shinn, P.E. > > -----Original Message----- > From: owner-emc-p...@majordomo.ieee.org > [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Arno van Kesteren > Sent: Friday, March 22, 2002 12:31 AM > To: emc-p...@ieee.org > Subject: Phase loss > > > > Dear All, > > When a circuit breaker trips on excessive ground current (>250 A) and while > measuring that one of the 3 phases doesn't carry any current (while the > others have the same current as the protective ground) what could be the > problem ? > > I was thinking of a sudden phase loss and would like to know how that could > happen without any loose connections in the system. > > The system itself contains a 3-phase rectifier. > > Greetings, > > Arno van Kesteren > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: emc-p...@hypercom.com > Dave Heald: davehe...@mediaone.net > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: emc-p...@hypercom.com > Dave Heald: davehe...@mediaone.net > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"