The LVD has an essential requirement for the safety of the user from electrical shock - see 1d, 2a and 2d of Annex 1. This essential requirement is transposed into the user access requirements of EN 60065. Anytime the user instructions instruct the user to open an electrical enclosure, the design must be sufficient to ensure that the user cannot access hazardous parts. Instructing them to remove power is not sufficient.
Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: Colgan, Chris [mailto:chris.col...@tagmclaren.com] Sent: Tuesday, March 19, 2002 7:36 AM To: 'Emc-Pstc' (E-mail) Subject: product modifications by the end user Hello good people Just say someone in your marketing department came up with the bright idea of selling upgrade kits to an unqualified, untrained end user that involved removing the top cover of a product. In the process not only would the victim be exposed to hazardous voltages (if the product was still connected to the mains) but he/she would also have to wire up mains connections. There would also be a possibility that critical insulation would be disturbed. Apart from telling them that they were mad and suggesting that someone could be killed or seriously injured, would there be any black and white legislation that you could use to help bin this idea? I can't find anything specific in EN60065 or the LVD. Thanks for any input Chris Colgan Compliance Engineer TAG McLaren Audio Ltd The Summit, Latham Road Huntingdon, Cambs, PE29 6ZU *Tel: +44 (0)1480 415 627 *Fax: +44 (0)1480 52159 * Mailto:chris.col...@tagmclaren.com * http://www.tagmclaren.com ************************************************************** Please visit us at www.tagmclaren.com ************************************************************** The contents of this E-mail are confidential and for the exclusive use of the intended recipient. If you receive this E-mail in error, please delete it from your system immediately and notify us either by E-mail, telephone or fax. You should not copy, forward or otherwise disclose the content of the E-mail. TAG McLaren Audio Ltd The Summit, 11 Latham Road Huntingdon, Cambs, PE29 6ZU Telephone : 01480 415600 (+44 1480 415600) Facsimile : 01480 52159 (+44 1480 52159) ************************************************************** Please visit us at www.tagmclaren.com ************************************************************** ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"