Mark & John - Since 21CFR is based on ANSI Z136.1, it seems the best of references. However, 21CFR is the ultimate judge for the US.
ANSI Z136.2 is for fiber optic systems, rather than products, but is still a good reference. Regards, Peter L. Tarver, PE Product Safety Manager Sanmina-SCI Homologation Services peter.tar...@sanmina-sci.com > -----Original Message----- > From: John Juhasz > Sent: Tuesday, March 05, 2002 12:28 PM > > Your best bet in classifying your 'system' is to > look at ANSI Z136.1 and .2 specs. In my opinion > (some may disagree) > it's a good guide. > > John Juhasz > Fiber Options > Bohemia, NY ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
