http://www.ieee-pses.org/symposium http://www.emc2004.org/
Sorry but the rule is different. A standards is Harmonized if the reference is published in the Offical Journal of the European communities. The EN 300 330-2, EN 301 489-XX, EN 60950, and the heatl standard are harmonized standard for SRD il all Europe 25 country and you don't need NB or CAB (is only a choice you are not oblige) The frequency is not harmonized but this oblige to notify in the country where you want sell the equipment that you are interest to put on the market a product. This process is a parallel process that is separate from the certification. The fact that the frequency are not harmonized shall [ut on the instruction manual and if some resctriction in a country are present this should be printed on the shipping box. The official information on the R&TTE as the link to the national body to notify the put on the market are on this site http://europa.eu.int/comm/enterprise/rtte/index.htm Ciao Paolo _________________________________________________ Paolo Gemma Siemens Mobile Communications S.p.A. SMC PG MW ST EMC & Safety SS Padana sup. KM 158 20060 Cassina de' Pecchi (MI) Italy phone +39 02 9526 6587 fax +39 02 9526 6375 mobile +39 348 3690185 e-mail [email protected] _________________________________________________ > -----Original Message----- > From: Piotr [mailto:[email protected]] > Sent: giovedì 3 giugno 2004 18.55 > To: EMC-PSTC; Gemma Paolo > Subject: Re: EU notified bodies for obtaining CE > certification for Intentional Radiators > > > In the time I got the answer from Hans Mellberg saying: > > Yes, a NB or CAB (same thing) is required for Radio products > approval in the EU-25 (was EU-15). Harmonized means that > there are no differences in radio spectrum usage in all 15 > countries of the pre-1 May 2004 countries. I say that because > the newly inducted members would un-harmonize already > harmonized frequencies their usage. How harmonized is defined > will most likely change in the next few months. > > look for ERC-70E in the www.ero.dk > > And also: > > Only when the standard is harmonized in all EU-15 countries > may you self declare compliance, i.e. no NB/CAB 13.553-13.567 > MHz is harmonized in all EU-15. 125 kHz is NOT which will > require an NB and also special instructions in your manual.. > That information is in ERC/REC 70-03E > > Regards > > Piotr Galka > > > ----- Original Message ----- > From: "Gemma Paolo" <[email protected]> > To: "Piotr" <[email protected]>; <[email protected]> > Sent: Thursday, June 03, 2004 4:15 PM > Subject: RE: EU notified bodies for obtaining CE > certification for Intentional Radiators > > > > http://www.ieee-pses.org/symposium > > http://www.emc2004.org/ > > -------------------------------------------------- > > > > What do you have in mind with not harmonized. > > EN 300 330 covers all SRD from 9 KHz to 25 MHz. > > > > The title is "Electromagnetic compatibility and Radio > Spectrum Matters > > (ERM); Wideband Transmission systems; Data transmission > > equipment operating in the 2,4 GHz > > ISM band and using spread spectrum > > modulation techniques; Part 2: > > Harmonised EN covering essential > > requirements under article 3.2 of the > > R&TTE Directive" > > > > > > The facttthat the use of the 125 KHz is not harmonized in Europe is > > another > items. Ciao Paolo > > > > _________________________________________________ > > > > Paolo Gemma > > > > Siemens Mobile Communications S.p.A. > > > > SMC PG MW ST EMC & Safety > > > > SS Padana sup. KM 158 20060 Cassina de' Pecchi (MI) Italy > > > > phone +39 02 9526 6587 fax +39 02 9526 6375 > > > > mobile +39 348 3690185 > > > > e-mail [email protected] > > > > _________________________________________________ > > > > > > > > > -----Original Message----- > > > From: Piotr [mailto:[email protected]] > > > Sent: mercoledì 2 giugno 2004 18.10 > > > To: ; Gemma Paolo > > > Subject: Re: EU notified bodies for obtaining CE > certification for > > > Intentional Radiators > > > > > > > > > Dear Experts, > > > > > > Is the situation with 125kHz RFID reader (5cm range) the > same ? I am > > > asking, because I was told, that 125kHz is not harmonised > (whatever > > > that > > > means) and notified Body is needed. > > > > > > If the situation is the same what point, or paragraph says it. > > > > > > Regards > > > > > > Piotr Galka [email protected] > > > > > > > > > ----- Original Message ----- > > > From: "Gemma Paolo" <[email protected]> > > > To: <[email protected]>; > > > <[email protected]>; <[email protected]> > > > Sent: Tuesday, June 01, 2004 9:14 AM > > > Subject: RE: EU notified bodies for obtaining CE > certification for > > > Intentional Radiators > > > > > > > > > > http://www.ieee-pses.org/symposium > > > > http://www.emc2004.org/ > > > > -------------------------------------------------- > > > > > > > > Under R&TTE if you apply Harmonized Standard like the > two standard > > > > mentioned > > > by you, there are no obligation to go to a EU notified Body. > > > > You have only to apply all the harmonized standards > covering EMC, > > > > SAFETY and > > > radio aspects prepare a Technical documentation and signa > > > declaration of conformity. > > > > The test shall be execute in a laboratory that can apply > > > the standards > > > > also a > > > internal laboratory is OK. > > > > Under the R$TTE The Notified Body is not oblige to execute the > > > > test but hit > > > rule is only to revised the give a opinion on the Technical > > > Construction File > > > (annexIV) and certify your internal quality system (annex V). > > > > > > > > EN 301 489-1 and EN 301 489-3 for SRD contain emission and > > > > immunity > > > requirement > > > > > > > > Bye > > > > Paolo > > > > > > > > _________________________________________________ > > > > > > > > Paolo Gemma > > > > > > > > Siemens Mobile Communications S.p.A. > > > > > > > > SMC PG MW ST EMC & Safety > > > > > > > > SS Padana sup. KM 158 20060 Cassina de' Pecchi (MI) Italy > > > > > > > > phone +39 02 9526 6587 fax +39 02 9526 6375 > > > > > > > > mobile +39 348 3690185 > > > > > > > > e-mail [email protected] > > > > > > > > _________________________________________________ > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > From: [email protected] > > > > > [mailto:[email protected]] > > > > > Sent: martedì 1 giugno 2004 8.00 > > > > > To: [email protected]; > > > > > [email protected] > > > > > Subject: EU notified bodies for obtaining CE certification for > > > > > Intentional Radiators > > > > > > > > > > > > > > > http://www.ieee-pses.org/symposium > > > > > http://www.emc2004.org/ > > > > > -------------------------------------------------- > > > > > > > > > > Dear Experts, > > > > > Is it compulsory that only EU notified bodies / > > > labs should > > > > > do the testing to confirm the compliance to EN300330 & > > > EN301489 for > > > > > obtaining CE marking. Is there any other way to obtain CE > > > > > certification for Intentional radiating devices operates at > > > > > 13.56 MHz (ISM frequency). Or is there any excemption for > > > > > devices operating at ISM frequencies? What about the immunity > > > standards for > > > > > these type of devices? Is EN55024 applicable? > > > > > Once again I am approaching this list for > finding the labs > > > > > those are European Union notified bodies, for obtaining CE > > > > > certification for Intentional Radiating devices. > > > > > > > > > > Sincerely > > > > > > > > > > K.Balasubramanian > > > > > Sr.Engineer, Hardware. > > > > > > > > > > ------------------------------------------- > > > > > > > > > > This message is from the IEEE Product Safety > Engineering Society > > > > > emc-pstc discussion list. > > > > > > > > > > IEEE PSES Main Website: http://www.ieee-pses.org/ > > > > > > > > > > To post a message send your e-mail to [email protected] > > > > > > > > > > Instructions for use of the list server: > > > > > > > > > http://listserv.ieee.org/listserv/request/user-guide.html > > > > > > > > List rules: http://www.ieee-pses.org/listrules.html > > > > > > > > For help, send mail to the list administrators: > > > > > > > > Ron Pickard: [email protected] > > > > Dave Heald: [email protected] > > > > > > > > For policy questions, send mail to: > > > > > > > > Richard Nute: [email protected] > > > > Jim Bacher: [email protected] > > > > > > > > All emc-pstc postings are archived and searchable on the web at: > > > > > > > > http://www.ieeecommunities.org/emc-pstc > > > > > > > > ------------------------------------------- > > > > > > > > This message is from the IEEE Product Safety > Engineering Society > > > > emc-pstc discussion list. > > > > > > > > IEEE PSES Main Website: http://www.ieee-pses.org/ > > > > > > > > To post a message send your e-mail to [email protected] > > > > > > > > Instructions for use of the list server: > > > > > > > > http://listserv.ieee.org/listserv/request/user-guide.html > > > > > > > > List rules: http://www.ieee-pses.org/listrules.html > > > > > > > > For help, send mail to the list administrators: > > > > > > > > Ron Pickard: [email protected] > > > > Dave Heald: [email protected] > > > > > > > > For policy questions, send mail to: > > > > > > > > Richard Nute: [email protected] > > > > Jim Bacher: [email protected] > > > > > > > > All emc-pstc postings are archived and searchable on the web at: > > > > > > > > http://www.ieeecommunities.org/emc-pstc > > > > > > > > > > > > > > ------------------------------------------- > > > > This message is from the IEEE Product Safety Engineering Society > > emc-pstc discussion list. > > > > IEEE PSES Main Website: http://www.ieee-pses.org/ > > > > To post a message send your e-mail to [email protected] > > > > Instructions for use of the list server: > > > > http://listserv.ieee.org/listserv/request/user-guide.html > > > > List rules: http://www.ieee-pses.org/listrules.html > > > > For help, send mail to the list administrators: > > > > Ron Pickard: [email protected] > > Dave Heald: [email protected] > > > > For policy questions, send mail to: > > > > Richard Nute: [email protected] > > Jim Bacher: [email protected] > > > > All emc-pstc postings are archived and searchable on the web at: > > > > http://www.ieeecommunities.org/emc-pstc > > > > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
