In message
<d250d01e39356a4e9cc3b4b459d66550951a0...@ms-cda-01.advanced-input.com>,
dated Thu, 9 May 2013, "McInturff, Gary" <gary.mcintu...@esterline.com>
writes:
Reminds me of when I first read up on a Gigawatt laser. I tried to
image how the measured the output. Did they put the worst performing
technican on the range and have him hold up the photometer and yell ?
?Okay turn it on?!
Do people still remember that the earliest measure of laser output was
the gillette - how many razor blades the beam would burn through?
--
OOO - Own Opinions Only. See www.jmwa.demon.co.uk
They took me to a specialist burns unit - and made me learn 'To a haggis'.
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher: <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>