On 2/21/2015 9:57 AM, John Woodgate wrote:
connection is not necessary for those ACCESSIBLE conductive parts
which are insulated from HAZARDOUS LIVE parts by DOUBLE or REINFORCED
INSULATION (CLASS II construction) or those which are protected from
becoming HAZARDOUS LIVE by a conductive part reliably connected to the
PROTECTIVE EARTHING TERMINAL
But this is not the point; the thread is about products claiming Class
I with *no connection to the mains PE*.
I got the impression that all energized parts of this UUT were isolated,
and there was no place where a PE connection might be made. Why one
might wish to add a PE conductor and claim Class 1 I can't imagine.
Advertising?
Cortland Richmond
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher: <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>