Thanks. I remembered I had to do something, but it was such an easy fix I didn't remember exactly what it was I had to do!
----- Original Message ----- From: "John Kasunich" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Saturday, May 26, 2007 10:33 AM Subject: Re: [Emc-users] Low end stepper driver controller? > Javid Butler wrote: > >> I've got a machine with a Xylotex >> 3-channel drive that runs fine with EMC, but I think I had to do >> something >> with the pinout. It's been a while but I think I had to swap some pins >> around. > > Yep, Xylotex's three channel board has step and dir swapped compared to > the "standard" EMC pinout. But thats easy to fix in HAL. EMC2's sample > stepper config comes with "standard-pinout.hal" and xylotex-pinout.hal", > and all you have to do is invoke one or the other from the ini file. > > You can do any pinout no matter how bizarre if you edit hal files. > > Regards, > > John Kasunich > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
