On Thu, 2008-04-17 at 14:30 -0700, Curtis W. Moore wrote: > My HobbyCNC board says it is a "Unipolar Chopper Control" > > It does 1/2, 1/4, 1/8, 1/16 microstepping. Uses 6 wire (2 common) > steppers. > > C
Thanks Curtis. Thats looks close. Too bad it has a 3 Amp max. I need around 8 Amps with slightly more voltage (45 V). -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/Bandit CNC) ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users