for the port, if it is a PCI or newer card, it will probably just work. Some old ISA and earlier cards had to be jumppered, but instructions came with them.
Now 'just work' is another issue. The board can work, but you still have some HAL configuration to do to let EMC know how to deal. I hope that helps! -- "Predictions Are Difficult.Especially When They Are About The Future" Niels Bohr -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of aaron Moore Sent: Wednesday, June 11, 2008 3:48 PM To: EMC userslist Subject: [Emc-users] Installing a second parallel port Hi Can some one tell me what I need to do to install a second parallel port apart from physically plugging it into the computer or will it just 'plug and play' Thanks for any help in this. Aaron -- Powered by Outblaze ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users