Kirk,
I used the G203v for my plasma table. Very nice drive. The step/direction
timing for
the 203 is faster than the others. If your limited to a 45V power supply I
would use
the 540. It is 4 203v's shrunk into one package for $299. It should be out any
time.
The 201/2/3 all take 10 micro step input.
The G210/212 has a built in STEP PULSE MULTIPLIER. This circuit makes it
selectable for full-step, half-step, 5 microstep and 10 microstep operation.
John
On 26 Jul 2008 at 22:34, Kirk Wallace wrote:
> I am considering using Gecko stepper drives on my Shizuoka (45 V
> supply). Does anyone have a summary of the differences between the
> different drives? They all seem very similar.
>
> G201 no short circuit protection
> G202 short circuit protection
> G203V multi protection, recirculate mode, 350 kHz maximum Step
> G210 same as G202?
> G212 same as G202?
>
> --
> Kirk Wallace (California, USA
> http://www.wallacecompany.com/machine_shop/
> Hardinge HNC/EMC CNC lathe,
> Bridgeport mill conversion, doing XY now,
> Zubal lathe conversion pending
> Craftsman AA 109 restoration
> Shizuoka ST-N/EMC CNC)
>
>
> ----------------------------------------------------------------------
> --- This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge Build the coolest Linux based applications with Moblin SDK &
> win great prizes Grand prize is a trip for two to an Open Source event
> anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________ Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
