What is the proper way to reset already set volume of G54 or G55? Should I home machine also? Problem that I can see that machine remember first set of G55 that I set with g10 L2 P2 x2 y2. When I input G10 L2 P2 x0 y0, and than set G10 L2 P2 X3 Y3 . I ran G90 G1 G55 X0 Y0 F5. Machine moved only X2 Y2 - old volume.
Do I do something wrong? Thanks Aram > On Mon, Nov 17, 2008 at 09:38:53PM -0700, [EMAIL PROTECTED] wrote: >> >> Next, I input g91 g1 g54 x0 y0 z0 f5 + ENTER >> And machine did not move. > >> If everything OK I should see move to x1 y1 z1. > > This is not correct since you asked for a relative (G91) move of > zero length (X0, Y0, Z0). > >> Is something wrong? > > No, read about G91 here: > http://linuxcnc.org/docs/html/gcode_main.html#sub:G90,-G91:-Set > > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's > challenge > Build the coolest Linux based applications with Moblin SDK & win great > prizes > Grand prize is a trip for two to an Open Source event anywhere in the > world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
