I have a 400K version, that line was already been discovered and i already checked my card chip (it says 400). Also, when i bought it, i asked for this version specifically. It would be more than a mistake if i had a 200K instead of a 400K.
El 05/12/2008 12:25 a.m., Stephen Wille Padnos escribió: > You have the 200k gate version, not the 400k gate version. > > I found this out by looking at the error output on line 264 of your pastebin > [ 114.376380] hm2/hm2_7i43.0: board has FPGA '3s200tq144', but the > firmware in hm2/7i43/SVST4_4B.BIT is for FPGA '3s400tq144' > > This relatively difficult to read line shows that you have a 3s200tq144, > but you're trying to load a bitfile for a 3s400tq144 (note 200 vs 400 in > those numbers). > > Change your HAL file so it's looking for firmware without a B at the end > - you need the file hm2/7i43/SVST4_4.BIT. > > It would help if you would also pastebin your configuration files. So > far you have told us the errors you get, but I've never seen the input > you give EMC2 to get them. > -Steve > > Richard Acosta wrote: > > >> http://pastebin.com/m38308b00 >> >> >> > > > ------------------------------------------------------------------------------ > SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. > The future of the web can't happen without you. Join us at MIX09 to help > pave the way to the Next Web now. Learn more and register at > http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
