On Fri, 19 Dec 2008, Sebastian Kuzminsky wrote: > Date: Fri, 19 Dec 2008 20:46:52 -0700 > From: Sebastian Kuzminsky <s...@highlab.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] EMC 2.2.7 + 7i43 + Ted's sample, > and same error than using EMC 2.2.6 + 7i43 + Ted's sample.... What now? > > Peter C. Wallace wrote: >> On Tue, 16 Dec 2008, Richard Acosta wrote: >> >>>> Did sc7i43P report that the 7I43 had a 400K FPGA? >>>> >>> Yes it says a 400k >>>> Well it should say something like: >>>> >>>> Pass: 1 Error Count: 0 loop count: 100000 >>>> Pass: 2 Error Count: 0 loop count: 200000 >>>> Pass: 3 Error Count: 0 loop count: 300000 >>> and i confirm this too. >> >> Have you tried upgrading to 2.2.8? >> >> I just did this on a test machine here (motherboard parallel port @ 0x378, >> 7I43-4 connected), started emc, (absolutely stock, no changes) doubleclicked >> on the hm2servo sample config (from Ted Hyde) and I was up and running (well >> I >> dont have machine attached but I did end up with a Axis being a nice 3d >> Etch-A-Sketch when I turned the motor shafts. > > If 2.2.7 doesnt work for him, i dont know why 2.2.8 would. Something's > wrong with Richard's hardware.
We've pretty much eliminated hardware. (The low level EPP tests work fine) Since the newly included demo config hm2servo, "just worked" I thought it might for Richard as well. > > > -- > Sebastian Kuzminsky > "Okay, people. Now is the time to start discussing the rules of war for > autonomous robots. Now, when it's still theoretical." -- Bruce Schneier > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users