Hi, I have been working on a Ethernet based pendant/operator console for EMC for a little while now (whenever I get a spare moment) , and have run into a little problem. I am using the EMCRSH, Telnet interface to EMC.
My pendant was going to be quite a simple affair, but as things go, it has grown larger that first anticipated. I now have up to 84 inputs, being pushbuttons, rotary switches and encoders, and LED indicators for all of these inputs. I also have a 8" digital photo frame as a monitor. These are all controlled by a microprocessor, which is also handling the Ethernet connection to my mini-itx EMC computer. The problem I am having is when I get an error from EMC, I can't get the error message back to my pendant. I have tried the Get Operator_display, Get Operator_text and Get error commands, but none of these are returning an error to me. I am testing this by issuing a simple G01 command from MDI mode, this should invoke an error in regard to having no federate. I get an error displayed on my EMC computer, but all my status reporting to my micro are returning OK's. Is there some other command I should be using??? Regards Andrew ------------------------------------------------------------------------------ Check out the new SourceForge.net Marketplace. It is the best place to buy or sell services for just about anything Open Source. http://p.sf.net/sfu/Xq1LFB _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
