and quick as quick can be both Alex and myself added this almost at the same time :)
http://www.linuxcnc.org/docs/devel/html/hal_basic_hal.html#r1_1_6 John On 10 Jan 2009 at 10:47, John Thornton wrote: > I'm not sure if they are deprecated or not... I don't think they are > perhaps just obsolete. I was > just as lost with linksp and other commands when I first started. In > the trunk (2.3) there is > only 4 linksp's left to fix. Now that you reminded me :). and yes I > need to add the description > for them in the basic hal section somewhere because you will find > them in most older > configurations and some if not most of the sample configurations. > > Thanks for the feedback > John > > On 10 Jan 2009 at 10:46, Greg Michalski wrote: > > > Instead of a dedicated section for old commands - maybe the > > inclusion of the > > deprecated command(s) and formatting of it(them) where > appropriate > > in the > > sections of the new 'preferred' commands/operations? Or would it > be > > easier > > from the standpoint of actually editing and maintaining the > manual > > to make a > > dedicated section like Donnie suggests? > > > > Greg > > www.distinctperspectives.com > > > > > > -----Original Message----- > > From: Donnie Timmons [mailto:dtimm...@etex.net] > > Sent: Saturday, January 10, 2009 9:41 AM > > To: emc-users@lists.sourceforge.net > > Subject: Re: [Emc-users] absolute analog output signal 0 - 10 V > > > > >John, thanks for your attention to helping me (or us) > >understand > > the new > > "net" > > >command. I only recently started using it, and it works >just > as > > outlined > > here: > > >http://www.linuxcnc.org/docview/html//hal_basic_hal.html#r1_1_4 > > > > > > I have to second Tom's comment. As a newbie to EMC you look at > other > > files > > and they use "linksp" all thou the file but the manual never > gives > > a > > explanation of "linksp". If you search thru the manual it uses > > "linksp" > > several times in examples. So it kind of like stepping into a > mud > > puddle the > > more you move around the muddier the puddle gets. The link above > is > > for the > > new commands the fact there are new commands and still working > old > > commands > > that are not explain added to the mud. If you look in section > 5.4.3 > > of the > > hal manual it list command that can be use in hal but does not > list > > "net". > > > > I think adding a section to the link above that shows old but > still > > useable > > commands would be helpful. Then add the whole thing to the hal > > manual would > > great. > > > > Donnie > > > -------------------------------------------------------------------- > > -------- > > -- > > Check out the new SourceForge.net Marketplace. > > It is the best place to buy or sell services for > > just about anything Open Source. > > http://p.sf.net/sfu/Xq1LFB > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > -------------------------------------------------------------------- > > ---------- > > Check out the new SourceForge.net Marketplace. > > It is the best place to buy or sell services for > > just about anything Open Source. > > http://p.sf.net/sfu/Xq1LFB > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > -------------------------------------------------------------------- > ---------- > Check out the new SourceForge.net Marketplace. > It is the best place to buy or sell services for > just about anything Open Source. > http://p.sf.net/sfu/Xq1LFB > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the new SourceForge.net Marketplace. It is the best place to buy or sell services for just about anything Open Source. http://p.sf.net/sfu/Xq1LFB _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
