max speed will also depend on drives you use and voltage you supply to them...
Regards, Alex. aaron moore wrote: > Hi > > I have recently built a 1500mm x 1500mm gantry style router. I am using EMC > to run three FL86STH156-4208 11.96 Nm stepper motors, with 16mm x 4mm pitch > trapezoidal screws. The gantry weighs some thing like 70kg. It works pretty > well except the fastest movement I can achieve for x and y is around 15 mm > per second before the steppers start complaining. I know the spigots on the > end of the screws were not turned very concentrically, (I used a crappy > lath)...could this be the reason for the lack of speed? > > Thanks for any response > > Aaron > > = > Full Color Brochure Printing > High Quality, Low Price and Fast Turnaround. Ask for free samples. > http://a8-asy.a8ww.net/a8-ads/adftrclick?redirectid=65771a5eb85700bb37ac7698c67afc83 > > > ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
