On Thu, 26 Mar 2009 17:17:32 -0500, you wrote: >Did you get a "home all" button in emc2.2? "home all" and the ctrl-home >keystroke are only enabled when AXIS thinks that there's a homing order >defined in the inifile, and disabled otherwise. (they're just two ways >to access the same underlying function)
Hi Jeff I wasn't aware of that and don't recall reading it in the axis docs. I used stepconf to set things up but it doesn't ask for any homing sequence, perhaps it should? It took me some time to find the relevant information, eventually found it in the integrators manual and have sorted it now, thanks. >We didn't intentionally change this between 2.2 and 2.3, so if you have >an inifile that is treated differently between the two, we need to have >a look at it and figure out what we did unintentionally. If you use >stepconf and don't modify the inifile by hand, then send the stepconf >file instead. I never really used 2.2, it was lacking in a few essential features. Steve Blackmore -- ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users