On Tue, Apr 14, 2009 at 08:57:36PM -0500, Jon Elson wrote: > My real concern is Mr. Harris' problem with the encoder counter > sometimes missing the reset on index, while it sets the bit saying that > it has done so. An earlier version of the firmware/driver had this > problem, but I made the final fix at the 2007 EMC-Fest, and the driver > fixes were in the July 2007 release of EMC2. So, I wanted to see if > anyone else was seeing similar problems. Also, I don't see why the > spindle sync would care what thread pitch he is cutting! That makes no > sense to me at all.
I looked at the driver code some last night. I do not see any obvious problems but there are lots of possibilities for non-obvious ones I think. I really need to see the plot I requested earlier in this thread. I would like to see it fixed but without any real data it's completely hopeless. Can you call him or something? Chris ------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
