Michael Jones wrote:
> I'm not SURE about the Z axis variations, but things seem to be more
> stable - I'm doing an engraving right now, so the jury's still out,
> but it looks good.
>
When setting up my machine I created a small G-code program to move the
axis up and down at different speeds and different distances, returning
to the same (bottom) position at the end.
Then I measured the distance with a gauge to check for any steps being
lost down the way.
Regards,
Rob
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
