On Wed, 2009-05-13 at 09:07 +0100, Dave Caroline wrote: ... snip > see the g code I posted (in [Emc-users] [OT] Fun with Math thread) for > 4 axis all it needs is a fly cutter ground to your rack form (near ... snip > It wont take too much to add the few missing starting points and later > to amend to 5 axis and helical involute generation (I know this as its > hacked from code I use already for form tool gear milling) > > Dave Caroline (archivist)
Thanks Dave. I meant to reply to your g-code post, but I wanted to study it first. I still need to do that. I suppose I could load it in a sim configuration and save myself a lot of brain work. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users