Gerhard Pircher wrote: > I'm using the Mesa 7i33 card to interface three RS-422 linear encoders to > EMC2. Now I would like to use the fourth input for the spindle speed > sensor, which delivers a 12V pulse and direction signal. But I wonder which > input of the 7i33 card should be connected to the pulse resp. direction > signal (if possible at all, but the Hostmot2 driver allows to run encoders > in counter mode).
The hostmot2 firmware currently supports Quadrature and Up/Down mode, but not Step/Dir, unfortunately. If your spindle is not reversible you could connect the step line to either Up or Down, and run it that way. -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
