I have hear but never really edit gcode, I noticed there are capital case and lower case letters, are they case sensitive?
-- Youda On Fri, Sep 4, 2009 at 10:34 AM, Claude Froidevaux <[email protected]>wrote: > Le 04.09.2009 10:43, Yann Jautard a écrit : > > Hi all, > > > > (sorry for my poor english, I'm from france) > > > > I'm doing a machine to apply glue for photovoltaics modules assembly. > > > > The goal is to apply a line of silicon glue around a metal frame, before > assembly of the frame with the laminated photovoltaic module, and then to > make a second pass to fill the gap betwen the laminted module and the frame > border with the same glue. > > > > For the hardware part, the machine is very similar to lots of hobby CNCs > I've read about on the internet : it's a X Y Z table, moved with steppers, > and with te glue distribution system attached on the Z axis. > > > > I'm using EMC to control the steppers. > > > > And my problem is : is there any possibility in Axis, on with some other > EMC GUI, to "learn" moves by jogging manually the machine, and taking > points, then having the computer to move the machine making lines between > theses points. > > > > As the moves I need to do are very simples, (just drawing a square with > the glue, in fact), I think learning moves like this will be far more easy > than creating Gcode. And it will be easier to adapt the moves and speeds if > I have some tolerances issues with the frames or the modules. > > > > Hello, > > Actually, Gcode is pretty simple. (much simplier than trying to record > something I thing) > > For you, something like this may help you to start: > > G21 (Unit in mm) > G90 (Absolute distance mode) > G17 > G40 (Cancel diameter comp.) > G49 (Cancel length comp.) > F150 (150mm/min) > > g92 x0 y0 z0 (define the current position as 0, this may need to > be different for you) > g1 z-5 (go down 5mm in Z) > g1 x50 (go to 50mm in X, no move in Y) > g1 y50 (go to 50mm in Y, X still in 50mm) > g1 x0 > g1 y0 > g0 z0 > > J'habite en Suisse romande... si vous avez des questions avec linuxcnc, > je vous aide volontiers. > > Claude > > > ------------------------------------------------------------------------------ > Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day > trial. Simplify your report design, integration and deployment - and focus > on > what you do best, core application coding. Discover what's new with > Crystal Reports now. http://p.sf.net/sfu/bobj-july > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
