Thanks Stuart, I work on these systems everyday and we do extremely close tolerance work. I rarely have issues with this type of setup myself.
Dave ----- Original Message ----- From: "Stuart Stevenson" <stus...@gmail.com> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Saturday, March 20, 2010 5:29 PM Subject: Re: [Emc-users] G52 and Fanuc conversion to EMC > Gentlemen, > I have both tachs and encoders on the cinci servos. The tachs feed the > amps. The encoders feed EMC2. Works flawless. > I have both resolvers and encoders on the G&L servos. Two of the four > axes > have scales also. The resolvers feed the amps. The encoders and the scales > feed EMC2. As of now they all work together flawless. > HTH > Stuart > > -- > dos centavos > ------------------------------------------------------------------------------ > Download Intel® Parallel Studio Eval > Try the new software tools for yourself. Speed compiling, find bugs > proactively, and fine-tune applications for parallel performance. > See why Intel Parallel Studio got high marks during beta. > http://p.sf.net/sfu/intel-sw-dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
