is your debounce connected to a thread? On Tue, May 4, 2010 at 3:03 PM, Neil Baylis <neil.bay...@gmail.com> wrote:
> Thanks Steve. > > I made 3 halmeters as you suggested. They all register FALSE, even > when the GUI is > showing the position in red when I hit the limit. > > Just to make sure halmeter is working, I added another halmeter on > axis.0.motor-pos-fb and it showed the same position as the GUI does, > updating correctly as I move the machine by hand. So halmeter is > working, but doesn't show the digital ins for some reason. > > Neil > > > You should try looking at all three things that have to do with the home > > switch: the pin ppmc.0.din.02.in-not, the signal Xminlim, and the pin > > axis.0.home-sw-in. > > > > If they are ever different, you have a problem (since the two pins are > > supposed to be connected together, they should always have the same > value). > > > > You should be able to hit the switch and see all three halmeters switch > > between true and false. > > > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > -- dos centavos ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users