Always a good idea when changing the subject to change the subject :) I'm a bit curious about where this thread goes...
On 05/05/2010 09:34 PM, BRIAN GLACKIN wrote: > Very much an outsider on this subject, but i recall recently a link here or > on another forum in which someone was using a lathe as the C axis with a > milling head on the X axis instead of traditional lathe tooling. The X axis > was very fast and would follow a programmed profile coordinated with the C > axis allowing lobe to nearly polygonal shapes. THere was supposedly > improved tooling life associated with the scheme as well. > > I could be all wet as well on this.... > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Our peculiar security is in the possession of a written Constitution. Let us not make it a blank paper by construction." --Thomas Jefferson, letter to Wilson Nicholas, 1803 ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
