Przemek Klosowski pravi: > On Wed, Sep 1, 2010 at 5:28 AM, Roland Jollivet > <roland.jolli...@gmail.com> wrote: > >> Why not use camera cable for the analog? >> >> Surveillance cameras run off long thin cables and they seem to work ok? >> > > Yes but the cameras use the NTSC-like (640x486, 60Hz, interlaced) > resolution, i.e. the frequency bandwidth is 10MHz; > people here want to use 1080p, which is 1920x1080 at 120Hz, i.e. 250 > MHz bandwidth. > If LCD is used and not for games then just use lowest possible refresh rate. 120Hz is just overkill. even 30 frames work (if you can tell that to driver) You will be amazed how big difference is just lovering from 120 to 60Hz,,,
just try cost is null!!! ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
