I don't think it is possible due to architectural issues. But you CAN run multiple parallel ports and use much more than 3 axis concurrently.
Other than that, you might consider, using small single board computers and put them all in a single cabinet with a large power supply with KVMs to share keyboards and monitors, or use display combining technology to allow multiple displays to be viewed on a single monitor. If what you need is not running g-code but ladder logic state machines, you run several parallel ports from a single machine that could be attached to different machines, again, depending on exactly what you are doing and how you are implementing it. I hope this helps a little ... Jack ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
