I had one project where it would be cool to tap it via CNC, I have never done that and as I work on this retrofit, I wonder if it would be possible for me to have that capability. What does it require hardware wise? Servo spindle motor?
thanks! On Wed, Jun 8, 2011 at 12:42 PM, Jon Elson <[email protected]> wrote: > Evan Foss wrote: > > Removing the EMCO hardware > > is a fast solution but a bad one as their control systems are better > > than what you can do with EMC IMHO. > Can you say why the old EMCO control is better than EMC2? By the way, I > have rigid > tapping on my two machines, using EMC2. One uses my PWM controller > board for > servo drives that take digital signals, the other uses my PPMC board set > for analog velocity > servo amps. > > Jon > > > ------------------------------------------------------------------------------ > EditLive Enterprise is the world's most technically advanced content > authoring tool. Experience the power of Track Changes, Inline Image > Editing and ensure content is compliant with Accessibility Checking. > http://p.sf.net/sfu/ephox-dev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ EditLive Enterprise is the world's most technically advanced content authoring tool. Experience the power of Track Changes, Inline Image Editing and ensure content is compliant with Accessibility Checking. http://p.sf.net/sfu/ephox-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
