Bruce Klawiter wrote: > I am adding 5000 count Heidenhain rotary encoders to the servo motors on my > mill. > The conduit that goes from the servo motor to the control box that holds the > power and tach wiring, can I run the encoder wiring in that conduit. > Would the power or tach wiring interfere with the encoder in anyway? > The tach certainly won't. The motor wires could. Depending on your servo amps, they may emit a great deal of RFI on the output if there is no filtering. These wires would then have sharp transitions of up to 100 V or so at tens of KHz. If the motor wires are shielded, and the encoder wires are also shielded, then this MAY work, but be aware of interference.
Jon ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
