On my Anilam converted BP Series 1 knee mill all the wires to the servos run in one flex conduit. The power wires are ordinary MTW wire, I would have to look to see what the resolver and encoder wires are (I'm not near the machine atm).
John On 11/13/2011 4:06 PM, Bruce Klawiter wrote: > I am adding 5000 count Heidenhain rotary encoders to the servo motors on my > mill. > The conduit that goes from the servo motor to the control box that holds the > power and tach wiring, can I run the encoder wiring in that conduit. > Would the power or tach wiring interfere with the encoder in anyway? > > ------------------------------------------------------------------------------ > RSA(R) Conference 2012 > Save $700 by Nov 18 > Register now > http://p.sf.net/sfu/rsa-sfdev2dev1 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users