On Fri, Dec 9, 2011 at 11:19 AM, <sa...@empirescreen.com> wrote:
> So imagine what the temp of the spindle would be if the shop temp was say > 90deg... All the manual says is - make sure the spindle doesn't get hotter > than 140F. > > Like I say - the old control did this automagically also. ;) > > sam > > We have a grinder with oil hydrostatic linear bearings that forces you to wait for 15 minutes before it will cut because they got tired of customers blaming them for tolerance errors that turned out to be due to thermal issues. This is a real bonus when the control crashes or you otherwise have to restart the control. The newer version of the software allows you to bypass the wait, but it's not worth the $ for us to upgrade. Eric ------------------------------------------------------------------------------ Cloud Services Checklist: Pricing and Packaging Optimization This white paper is intended to serve as a reference, checklist and point of discussion for anyone considering optimizing the pricing and packaging model of a cloud services business. Read Now! http://www.accelacomm.com/jaw/sfnl/114/51491232/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
