On Mon, Jan 2, 2012 at 11:19 AM, Jon Elson <el...@pico-systems.com> wrote:
> If the pads are completely covered by the part, you have a real dilemma! > About the only way to solder these are IR reflow or hot air. A hair dryer > doesn't get hot enough, a heat gun is probably too much for sensitive > parts. > There are hot air rework stations that are designed to do this. They have > a heating element that is controlled to a reasonable temperature and an air > supply that blows over the heater. Skillet/hotplate soldering works great for those situations: http://www.youtube.com/watch?v=Uov0SPHKcnk ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users